Botox & Fillers · Tepebaşı, Eskişehir

Dermal Filler Treatments in Eskişehir

Dermal fillers are treatments among the non-surgical facial rejuvenation methods, used to support areas that have lost volume and to revitalise skin tissue. Choosing the right type of filler and the right area to treat is decisive for a result that is both natural and safe.

What are dermal fillers and what are they used for?

Filler treatment is performed to make up for the deficit in areas of the face that have lost volume, or to add controlled volume to certain areas. It is not limited to wrinkle treatment. Because of its biological contributions to skin tissue, it can also be chosen to support skin quality.

The filler materials used today are largely made from biocompatible substances that also occur in nature. As a result, compatibility with the tissue is high and the risk of unwanted reactions is kept relatively low.

Which types of filler are used?

In clinical practice, filler materials with different structures are available. Each differs in how long it lasts, its density and the areas where it is preferred.

Hyaluronic acid (HA) fillers

This is the most commonly used type of filler. Hyaluronic acid (HA) is a molecule that the body produces itself; for this reason, it is well tolerated by the tissue. It is produced in different densities and can be used both for superficial lines and for deep volume loss. Its effect is not permanent, and the fact that it can be dissolved enzymatically when needed provides an important safety advantage.

Calcium hydroxylapatite (CaHA)

Calcium hydroxylapatite (CaHA) is a compound also found in bone structure. As well as providing direct volume support, when diluted with saline it can also be used to stimulate collagen and elastin production in the tissue. In this way, a single material can serve two different clinical goals.

Agarose, caprolactone and other filler types

Agarose- and caprolactone-based fillers last longer, but because they cannot be dissolved, they are products that require careful assessment. Although some synthetic fillers may appear to last longer, factors such as their inability to adapt to the ageing process, the fact that they cannot be reversed when needed, and their long-term behaviour in the tissue influence the decision to use them.

Your own fat tissue

Fat tissue taken from another part of the body can be transferred to the face to add volume. Because it is done with your own tissue, compatibility is high; however, as it requires a surgical procedure, it is considered as a process separate from filler treatments.

Why do biocompatible fillers stand out?

Although some synthetic fillers may appear to last longer, they generally rank lower in order of preference. Because the ageing process continues, the facial structure may need to be updated over time. Materials that are biocompatible with the tissue, that can adapt to natural ageing and that aim to benefit the skin offer a more flexible treatment process in this sense.

Info

The filler product does not only add volume; materials such as HA and CaHA can also support moisture retention and collagen production in the skin tissue.

Which areas of the face are treated with fillers?

Fillers are used in different areas of the face with different clinical goals. The anatomical structure of the area, the vascular risk it carries and the presence of other problems that need to be treated together directly determine the way and the order in which the treatment is performed.

Temple and between-the-brows filler

Temple area. Volume loss above and to the side of both brows gradually leads to the brows and upper eyelids moving downward. Filler applied to the temple area recreates the volume in this region and helps lift the brows and eyelids. The visual effect goes beyond simply filling the temple area. More information: temple filler.

Between the brows. Where deep folds have formed, filler on its own or together with Botox can provide a more noticeable smoothing. For lines that form when frowning but disappear afterwards, the first choice is Botox treatment. Because this area carries particular vascular risks, it is important that it is treated by experienced hands.

Eye area and under-eye filler

Corner of the eye (crow's feet area). For the lines at the corners of the eyes known as crow's feet, the first choice is usually Botox. For lines too deep for Botox to reach, very fine fillers may be preferred as an alternative or complement.

Under-eye filler. The under-eye hollow is an area that can sometimes become noticeable even in your twenties. In people with upper respiratory allergies, it commonly appears together with dark circles. The volume loss here can extend as a hollow continuing toward the cheek and is also reflected in the hollow beside the nose.

Under-eye filler does not just fill the hollow area; it reduces the shadow effect and contributes to the structural improvement of the skin, which brightens the area. For this reason, it is often also called "light filler" in clinics. However, it is one of the riskiest areas among eye area treatments. When impaired circulation or serious problems in skin structure are also present, doing only filler without addressing these problems first can lead to unwanted results. More information: under-eye filler.

Caution

The under-eye area is one of the most vascularly sensitive areas of the face. The decision to use filler in this area must only be made after a thorough assessment by the doctor.

Cheekbone and cheek filler

Volume in the cheekbone area is one of the clear signs of a youthful appearance. Losses in this area appear as a notched look on the cheek and, in larger amounts, as a marked hollow. The nasolabial fold beside the nose also usually deepens together with volume loss in this area.

Large volume losses that can create an unwell appearance can be compensated to a significant degree with suitable filler treatment. Volume support in this area, one of the main components of the triangular structure of the face, directly affects the face's overall youthful expression. More information: cheek filler.

Nasolabial fold (smile line beside the nose) filler

The nasolabial fold usually begins to take shape after the late twenties. In some people this line can look prominent and sharp. However, the fold here is often a reflection of volume loss in the area above; filling this area directly may not always be a good option.

Loss of support in the cheekbone area can cause the tissue above to slide down and this fold to deepen. For this reason, first rebuilding the volume support in the upper area gives a better-quality result. When dense fillers with low elasticity are applied directly to this area, an unwanted puffy look may appear in the mid-face.

Lip filler and lines above the lip

Lip filler. The lips are areas that lose volume, develop lines and begin to dry out with age. Lip filler can also be applied only to define the contour and revitalise the lips, without aiming for a noticeable increase in size. A lip with a sharper border and fewer lines looks noticeably healthier. When an increase in volume is desired, a result proportionate to the overall structure of the lip is aimed for.

Vertical lines above the lip. For vertical lines, which are mostly associated with smoking, filler treatment can give positive results. Where intense facial movement is the deciding factor, however, fillers alone may not provide a complete solution; reducing the movement with botulinum toxin injection provides an additional contribution to the treatment.

Lower corners of the mouth and chin filler

Lower corners of the mouth. The downward drooping at the corners of the mouth is mostly related to facial movement. If the lip-pursing movement described as a "look of dissatisfaction" is prominent, this movement is first softened with botulinum injection, and then a more lasting improvement is aimed for with filler applied to the triangular area at the corner.

Chin area. In chins that are naturally small, adding volume with filler can improve aesthetic proportions. This effect is felt especially clearly when viewed in profile. For a dimpled look caused by chin-puckering movements, a smoother contour can be achieved when combined with botulinum injection.

Jawline filler

A defined side jawline is considered one of the important elements of a youthful appearance. When this definition decreases or is not sufficient from birth, the line can be redefined with filler, with different goals for women and men. Jawline filler is an important component of liquid facelift treatments. More information: chin and jawline filler.

Nose filler

In noses with a hump or a drooping tip, if there is no structural problem affecting breathing and the appearance is not too pronounced, it may be possible to lift the nose tip and soften the look of the hump with filler. Anatomical conditions that require surgery are considered outside this scope.

Neck line filler

If deep horizontal lines on the neck are related to strong platysma band movement, relaxing the platysma with botulinum injection followed by filler in the deep hollow areas can give more effective results when applied together.

How is filler treatment performed?

The filler procedure is usually completed with negligible discomfort. In sensitive areas such as the lips, a local anaesthetic cream is applied to increase comfort. Although the session length varies with the number of areas, it can be kept short.

What is the difference between cannula and needle injection?

In some areas, a flexible cannula with a blunt tip is used instead of a classic needle. Especially in sensitive areas such as under the eyes, the risk of bruising is noticeably reduced with a cannula. Which technique is chosen depends on the area being treated and the doctor's assessment.

What should you expect after the treatment?

Mild bruising or swelling due to the injection may be seen; this usually passes quickly. Significant long-term side effects are rare. Nevertheless, in terms of the risk of vascular complications, it is decisive that the doctor performing the procedure knows the anatomy well and uses high-quality, registered products.

Who are dermal fillers suitable for, and who are they not suitable for?

Who can benefit?

Healthy adults, or adults with a chronic disease under control, who have no active infection or open wounds, people with complaints of volume loss, lines or sagging in the face, and those aiming to improve aesthetic proportions can generally be assessed for filler treatment.

When may it not be suitable?

  • Active skin infection
  • An open wound in the area
  • Pregnancy and breastfeeding
  • Uncontrolled autoimmune disease
  • Having had permanent filler applied previously in the treatment area

These are conditions that need to be assessed carefully; the decision is made during the doctor's examination.

How long do fillers last?

How long the effect lasts depends on the structure of the filler used, the area treated, whether it is a first or repeat treatment, and how much the person uses their facial expressions. Although a period of 6 to 18 months is generally given, this range varies considerably from person to person.

Does the effect last longer with repeat treatments?

It has been observed that filler treatments performed at regular intervals, as the need arises, show longer-lasting effects over time. Behind this lies not only the presence of the filler, but also the collagen production and structural improvement that materials such as HA and CaHA trigger in the tissue.

Why does the effect decrease over time?

Apart from the biological breakdown of the filler, the continuing ageing process also contributes to the effect decreasing. Since volume losses, especially of the person's own fat tissue, continue with age, filler treatment slows this process but does not stop it completely. This reality requires considering filler not as a one-off "solution" but as part of an ongoing care approach.

Which filler should be chosen?

The type and density of filler are determined according to the structure of the area to be treated, the quality of the skin and the person's goal. Because a very wide range of filler products is available on the market, the deciding criteria should be suitability for the area, the product's licensing and registration status, and manufacturing quality, rather than a cost-focused choice.

For a treatment that aims to minimise risk while preserving a natural look, product quality and the doctor's experience are two elements that complement each other.

Dermal fillers give more consistent results when considered not on their own but within a plan that assesses the face as a whole. A combination treatment can be planned, sometimes with non-surgical facelift methods, and sometimes with mesotherapy or PRP treatments.

Frequently asked questions

Common questions about dermal fillers

Are dermal fillers painful?

In most areas, an anaesthetic cream is used before the treatment. In more sensitive areas such as the lips, a local anaesthetic injection may also be preferred. In general, the procedure is kept short, and although the perception of pain varies from person to person, it remains at a tolerable level.

How long does a filler treatment take?

Treatment of a single area is usually completed in 15-30 minutes. When more than one area is planned, it may take longer. The pre-treatment assessment and anaesthesia preparation are also added to this time.

When can I return to daily life after filler treatment?

Most patients can return to social life the same day. Mild swelling or bruising passes within a few days. Bruising may last a little longer, especially in the under-eye area. It is recommended to avoid intense exercise, saunas and alcohol consumption for the first 24-48 hours.

Is hyaluronic acid filler permanent, and can it be dissolved?

HA-based fillers are not permanent; they are broken down by the body over time. They can also be dissolved when needed with an enzyme called hyaluronidase. This property allows rapid intervention if an unwanted result occurs or a complication develops.

Will fillers make my face look puffy and artificial?

This concern can arise when an excessive amount of filler, or filler of a density unsuitable for the area, is used. With the right product choice, the right amount and a technique suited to the anatomy of the area, a natural result can be achieved. This is why clinical assessment is critically important.

What is the difference between Botox and fillers, and can they be done together?

Botox softens dynamic lines by temporarily relaxing the muscles of facial expression. Fillers, on the other hand, add volume and support static lines. Because the two work through different mechanisms, they are often planned together. For example, in areas such as the lower corners of the mouth or between the brows, a combined treatment can give a better result.

How often should fillers be renewed?

Depending on the material and the area, a touch-up is usually planned every 12-18 months. With treatments done at regular intervals, longer-lasting effects may be observed over time. The exact interval is determined by personal factors and the doctor's assessment.

Glossary

Terms used on this page

Hyaluronic acid (HA)
A polysaccharide molecule found naturally in the body with a high capacity to bind water. As a filler material, it is injected into the skin tissue to provide volume and moisture support.
Calcium hydroxylapatite (CaHA)
A mineral compound also found in bone structure. A filler material used both for volume support and for its collagen-stimulating effect.
Nasolabial fold
The line or fold running from the side of the nose to the corners of the mouth. It can deepen with volume changes in the face.
Platysma
A thin muscle running superficially in the neck area. Strong platysma contractions contribute to neck bands and lines becoming more prominent.
Cannula
A thin, flexible tube with a blunt tip. When used instead of a classic needle in filler treatments, it causes less trauma to the surrounding tissue and blood vessels.
Botulinum toxin
A neurotoxin used to temporarily relax the muscles of facial expression. In combined treatments with fillers, it provides a complementary effect.

Let's look at your face as a whole first.

Which area, which type of filler and how much will be used is determined during the consultation according to your facial structure and your goal.