Non-Surgical Facelift · Tepebaşı, Eskişehir

XERF in Eskişehir: Next-Generation Tightening That Reaches Deep Into Your Face

A non-surgical, needle-free dual-frequency radiofrequency treatment that requires no numbing cream and targets both the surface and the deep layers of the skin in the same session.

That slight loosening you notice in the mirror, a jawline that has lost its definition, fine lines settling around the eyes… Most of these come not only from the surface of the skin but from the deep supporting tissues that hold it up. XERF was developed to reach exactly there.

What is XERF?

XERF is a next-generation monopolar radiofrequency (RF) system that tightens and rejuvenates the skin without surgery or injections. It is the world's first patented dual-frequency RF technology: by using two different frequencies together in a single shot, it reaches different depths of the skin at the same time.

  • 6.78 MHz: Tightens the superficial and middle layer of the skin (dermis); works on fine lines, pores and skin quality.
  • 2 MHz: Goes deeper, reaching the subcutaneous fat, the connective tissues and as far as the SMAS / fascia, the supporting layer of the face; provides structural firming and contour.

Result: The collagen structure is strengthened, facial contours become more defined, and through its own natural renewal process the skin takes on a firmer, younger appearance.

3 features that set XERF apart

1. Surface + depth in a single session

Previous-generation monopolar RF devices work with a single frequency (6.78 MHz) only and concentrate the energy mainly in the dermis. XERF, thanks to its second frequency, also reaches the deep tissues and keeps the heat in the subcutaneous layer for longer (about 2.5 times).

2. Comfort without numbing cream

WaveFit™ Pulse technology divides the energy into up to 12 small sub-pulses instead of a single harsh pulse, while the integrated cryogen cooling system (ICD) protects the skin surface. As a result, the procedure is done without anaesthesia or numbing cream (Never-Numb™). Many patients compare the sensation to a hot stone massage.

3. Fast and personalised

Three depth modes and 10 intensity levels allow the treatment to be adjusted to your age and skin structure. Thanks to its large tip and no waiting time for numbing, a full-face treatment is usually completed in 45 minutes or less.

Previous-generation monopolar RFXERF
FrequencySingle frequency (6.78 MHz)Dual frequency (6.78 + 2 MHz)
Target layerMainly the dermisDermis + subcutaneous fat + SMAS/fascia
Numbing creamMay often be neededNot needed
PersonalisationLimited3 depth modes, 10 intensity levels

Treatment tailored to you: three depth modes

Your doctor combines these modes in different proportions according to your age, skin thickness, degree of laxity and facial volume to create a protocol tailored to you.

  • Superficial (Shallow): Fine lines, enlarged pores, skin texture and superficial firmness.
  • Middle: Moderate laxity and overall skin tightening.
  • Deep: Reaches the deep tissues with dual frequency; structural lifting and contour shaping.

In your 20s and 30s: prevention and contour

The aim is to slow down ageing ("slow aging") and to define the jawline. Deep and middle modes are used together for a sharper V-line; for radiance and texture quality, the superficial mode or skin-boosting treatments can be added.

Age 50 and over: structural firming

About half of the pulses are directed with the deep mode to the mid and lower face (nasolabial area, jawline, double chin); the rest are distributed over the whole face with the middle and superficial modes. In this way, both deep lifting and superficial tightening are targeted in a single session.

Thin skin or hollow cheeks

To preserve volume, the proportion of the deep mode is reduced and the emphasis is placed on the superficial and middle modes. Tightening is achieved without loss of volume.

Most commonly treated areas

Double chin and jawline

The dense fat tissue and loose ligaments of the double chin area require a protocol specific to the deep mode. So that the energy concentrates at the target depth, the tip is held in place rather than glided (stamping); cooling is increased so that the surface is protected while higher energy is delivered to the deeper layers. The goal: a shaped chin area, firmer connective tissue and a more defined jawline (V-line).

Eye area and eyebrows

For the thin and delicate eye area, the superficial mode is used with a small, precise tip (Effector 10). Because a drooping brow results not only from the skin but from the loosening of the supporting ligaments underneath, the upward pulling effect XERF creates in the deep tissues helps define the arch of the brow and lighten the heaviness on the eyelid. Crow's feet and fine lines under the eyes are softened; and even in this delicate area, no numbing cream is needed.

Acne scars and pores

The collagen renewal triggered by XERF and the increased microcirculation tighten enlarged pores and bring improvement in acne redness and early-stage marks. For deep, depressed acne scars, however, combined treatments with fractional laser and microneedling RF are preferred first for the best result.

Combinations that take results even further

It can be safely used in combination with all skin tightening and renewal treatments.

  • XERF + skin-strengthening treatments (youth injections, Salmon DNA / PDRN): Add hydration, glow and radiance on top of the tightening; contribute to the renewal process in the stimulated tissue. The microcirculation increased by XERF also supports the effectiveness of these products.
  • XERF + microneedling RF: Deep lifting together with treatment of pores, scars and acne marks.
  • XERF + laser / IPL: Alongside tightening, addressing spots, uneven skin tone and a dull appearance.
  • XERF + Botox, fillers and biostimulators: Holistic facial rejuvenation together with expression wrinkles and volume loss.
  • XERF + Ultherapy: At appropriate intervals, lifting is achieved with different effects in different layers.
  • XERF + Endolift: At different times and appropriate intervals, lifting and skin renewal are achieved through different mechanisms.

When are the results seen?

TimeWhat happens?
Immediately after the procedureA feeling of tightness and a mild lifting effect in the first 15–20 minutes
First weekSmoother skin texture, vitality and radiance
Months 2–3Lifting becomes visible and the contour sharper with new collagen production
Months 3–6The period when results reach their peak
6–12 monthsThe period over which the effect is usually maintained; it can be extended with 1–2 maintenance sessions a year

There is usually no recovery period (downtime); you can return to your daily life immediately after the procedure.

What to keep in mind before and after treatment

Before

  • About 1 week before the treatment, pause retinol/retinoids and exfoliating products such as AHA/BHA.
  • Drink plenty of water and use a moisturiser and sunscreen.
  • On the day of your appointment, come to the clinic without make-up and with clean skin.

After

  • Do not apply ice or cooling products to your skin for the first 24 hours: it is important that the controlled heat that triggers collagen production stays in the tissue.
  • Avoid saunas, steam rooms and very hot showers for the first 24 hours.
  • Moisturise your skin regularly and use sunscreen.

Who is XERF not suitable for?

  • People with a pacemaker, defibrillator or an active electronic / medical implant
  • Pregnant women
  • People with an active cold sore, infection or open wound in the treatment area (postponed until healed)
  • People with a serious uncontrolled systemic disease (a doctor's assessment is needed first)
  • People whose sagging is so advanced that it can only be corrected with a surgical facelift

Information

XERF is effective for mild and moderate laxity; it does not replace surgery in advanced sagging.

Is it the right option for you?

Every face is different. The thinness of your skin, the amount of fat tissue and the degree of sagging determine which mode is used, in what proportion and in which combination. Book a consultation so we can create the most suitable plan for you together; let us assess your skin, listen to your expectations and prepare your personalised XERF protocol.

This article is for information purposes. Suitability for treatment and expected results vary from person to person; the decision is made after a medical examination by the doctor.

Frequently asked questions

Common questions about XERF

Is XERF painful, is numbing cream needed?

No, numbing cream is not needed. Instead of a single harsh pulse, the energy is divided into up to 12 small sub-pulses, and the skin surface is protected by the cooling system. Many patients compare the sensation to a hot stone massage.

How long does a XERF treatment take?

Because there is no waiting time for numbing, a full-face treatment is usually completed in 45 minutes or less.

Can I go back to work after XERF?

There is usually no recovery period (downtime); you can return to your daily life immediately after the procedure. For the first 24 hours, it is recommended that you do not apply ice and that you avoid saunas, steam rooms and very hot showers.

When are XERF results seen, and how long do they last?

A feeling of tightness and a mild lifting effect is felt in the first 15–20 minutes. With new collagen production, the lifting becomes visible in months 2–3, and results reach their peak in months 3–6. The effect is usually maintained for 6–12 months and can be extended with 1–2 maintenance sessions a year.

How many XERF sessions are needed?

The number of sessions is determined by the doctor according to your age, skin structure and degree of laxity. The effect can be extended with 1–2 maintenance sessions a year.

How does XERF differ from previous-generation RF devices?

Previous-generation monopolar RF devices work with a single frequency (6.78 MHz) and concentrate the energy mainly in the dermis. Thanks to its second frequency (2 MHz), XERF reaches the subcutaneous fat and as far as the SMAS / fascia; with three depth modes and 10 intensity levels, it is adjusted to the individual.

Can XERF be combined with other treatments?

Yes. It can be combined at appropriate intervals with skin boosters, microneedling RF, laser / IPL, Botox, fillers, biostimulators, Ultherapy and Endolift. The plan and timing are determined by the doctor.

Is XERF enough for advanced sagging?

XERF is effective for mild and moderate laxity; however, in sagging so advanced that it can be corrected with a surgical facelift, it does not replace surgery.

Glossary

Terms used on this page

Radiofrequency (RF)
Electromagnetic energy that generates heat in tissue depending on its resistance. In aesthetic treatments it is used to stimulate collagen renewal.
Monopolar RF
A type of radiofrequency in which the energy is delivered to the tissue from a single treatment tip; the energy can reach deeper layers.
Dermis
The layer beneath the epidermis, the upper layer of the skin, containing collagen and elastin fibres.
SMAS / fascia
The supporting layer beneath the subcutaneous fat that carries the facial muscles and the skin.
Collagen
The protein that largely determines the structural firmness and elasticity of the skin. Its amount and quality decrease with age.

First, let us assess your skin.

The XERF protocol best suited to you is determined at the consultation according to the thinness of your skin, the amount of fat tissue and the degree of sagging.